Engineered hardwood floors are a popular choice for many homeowners, as they look great and last for years. But, to keep them looking their best, they need regular cleaning and maintenance. Knowing how to clean engineered hardwood floors can help you keep your floors looking new.
The engineered hardwood floor is more resistant to moisture than traditional hardwood, making it a great choice for areas such as kitchens and bathrooms. It is also more resistant to dents and scratches, making it a great choice for high traffic areas.
Cleaning engineered hardwood floors is easier than you might think. By following a few simple steps, you can keep your floors looking beautiful for years to come.
When it comes to cleaning engineered hardwood floors, the key is to use the correct products and techniques. This will ensure that the floor is well taken care of and without the risk of damage.
Engineered Wood Cleaning Mistakes
It is important to be aware of the mistakes that can lead to damage when cleaning engineered wood. One of the most frequent and damaging mistakes is the use of harsh chemicals. Harsh chemicals can cause irreparable damage to the finish of engineered wood, as well as discoloration, peeling, and weakening of the wooden material.
The use of steam mops is also a mistake when cleaning engineered wood, as these can also cause damage due to the high temperature and amount of moisture produced.
Additionally, rough applicators such as steel wool, scouring pads, or even sandpaper should never be used on engineered wood. These may seem to remove dirt and grime, but they will also result in scratches and damage to the wood finish.
Read more: How to Clean Prefinished Hardwood Floors
Engineered Hardwood Cleaning Supplies
It is important to understand the cleaning supplies needed to ensure the flooring is maintained properly. To ensure proper maintenance, the following supplies are recommended:
- Microfiber dust mop
- Soft-bristled broom
- Vacuum cleaner
- Wet mop and bucket with water
- Hardwood floor cleaner
- Soft cloth or sponge
The microfiber dust mop can be used to gather dust, dirt, and other debris from the surface of the engineered hardwood floor. This should be done regularly, as dust and dirt can easily build up and cause damage to the floor. The soft-bristled broom can also be used in addition to the microfiber dust mop to remove any stubborn dirt or debris.
Vacuum cleaners are also a great tool to use for removing dirt and debris from the floors. It is important to note that the vacuum cleaner should be used on the lowest setting, as higher suction can damage the flooring.
Best Cleaner for Engineered Wood Floors
When it comes to cleaning engineered wood floors, there are two main options to choose from: storebought engineered wood cleaners and homemade or naturally engineered wood cleaners.
Storebought cleaners usually come in the form of sprays, mops, or wipes and contain chemicals that can be harsh on the flooring. They are often quite effective, but can be expensive.
Homemade and natural cleaners, on the other hand, are usually cheaper and made from ingredients like white vinegar, rubbing alcohol, and olive oil. They are less intense and don’t contain any harsh chemicals, and are often just as effective as storebought varieties.
Storebought Engineered Wood Cleaners
In addition to the natural and homemade cleaning agents, storebought cleaners can also be used to effectively clean engineered wood floors. These cleaners are typically designed specifically for hardwood floors and are available at most home improvement stores and supermarkets.
They may come in liquid or foam form and can be applied directly to the floor or diluted with water. They usually contain a variety of ingredients, such as surfactants, which help to remove dirt and grime, and polymers, which help protect the floor from future damage.
Additionally, some storebought cleaners may also contain essential oils or fragrances to add a pleasant scent to the room. Before using any storebought cleaner, it is important to read the labels and instructions for proper use and safety.
Homemade / Natural Engineered Wood Cleaners
Homemade and natural cleaners provide an alternative option for those looking to keep their engineered wood floors clean. Natural cleaners, using ingredients such as white vinegar, essential oils or lemon juice, offer a more environmentally friendly alternative to store-bought cleaning solutions.
White vinegar is a strong and powerful cleaning agent that can be combined with water to tackle dirt and grime. Essential oils, like lemon juice, are also a great option for tackling dirt and grime and can add a pleasant scent to the floor.
For an extra boost of shine, a mixture of olive oil, warm water, and lemon juice can be used. Natural cleaners provide an eco-friendly, affordable, and easy to use option for those looking to keep their engineered wood floors clean.
How to Clean Engineered Hardwood Floors: Basic Cleaning
Engineered hardwood is a great flooring option for many, but it requires regular maintenance and cleaning to keep it looking its best. The first step on how to clean engineered hardwood floors is to clear the space. This means removing any furniture or rugs that may be on the floor.
Once this is complete, sweep the floor regularly with a soft bristled broom. To really get the floor clean, use a damp mop and a cleaner specifically designed for wood floors. Common stains on engineered hardwood can be removed with a cloth and a cleaning product that is safe for wood. Finally, once the floor is clean, put everything back in its place.
Before commencing any cleaning procedures for engineered hardwood, the space must be cleared of furniture, rugs, and other items that may be obstructing the area. It is important to move all objects to a different area of the room as items that have been left in place can be damaged during the cleaning process.
Additionally, it is important to check for any debris, dirt, or other materials that may have been collected on the floor. Vacuuming and dusting the area can be an effective way to clear the space. Additionally, using a damp mop to remove any collected dirt and other materials from the surface can help to ensure a thorough cleaning.
Sweeping regularly is an important part of cleaning engineered hardwood floors. After clearing the space of any furniture or objects, a regular sweeping routine can help to maintain clean floors.
It is recommended to sweep at least once per week, or more often for heavily trafficked areas. The bristles of a broom or sweeper should be soft enough that it will not scratch the surface of the engineered hardwood. A dustpan should be used to collect debris and it should be emptied after each use.
For deep cleaning, a vacuum cleaner with a brush head attachment can also be used. A vacuum cleaner with a beater bar should be avoided as it can damage the surface of the engineered hardwood.
Clean with a Damp Mop
Once the area is cleared, the routine cleaning of engineered hardwood floors is easy. Sweeping the floor regularly helps remove dirt and dust, reducing the risk of scratching the surface.
For an in-depth clean, using a damp mop is recommended. It is important to use the correct cleaning products suitable for engineered hardwood. Many people make the mistake of using products made for real hardwood, which can damage the surface.
The mop should be lightly dampened, and excess water should be wrung out. The mop should glide over the surface and wipe up with a clean cloth. This will help remove dirt and residue, leaving the floor looking pristine.
Removing Common Stains on Engineered Hardwood
One of the most important tasks for a homeowner with engineered hardwood is to understand how to remove common stains. Common stains are spilled liquid, dirt, and dust that can be difficult to remove without the right product and technique.
The best way to remove common stains from engineered hardwood is to use a mild soap and warm water solution. To make the solution, mix one cup of mild soap with a gallon of warm water. Then, use a damp mop to apply the solution to the affected area. If the stain is still present, it may be necessary to use a wood-safe cleaner or a wood-safe bleaching agent.
Put Everything Away
Once the space is swept and mopped, the final step of cleaning engineered hardwood floors is to put everything away. It is important to do this in order to prevent dust and debris from accumulating on the floor. This includes furniture, rugs, and any other items that could potentially scratch the surface of the floor.
Additionally, any items that have been placed on the floor should be wiped down using a cloth dampened with a cleaning solution. This will ensure that the floor is completely clean and free of dirt and dust.
It is also important to make sure that the furniture is not too close to the floor. This can cause damage over time and could lead to scratches or discoloration. Similarly, all area rugs should be checked for proper placement.
Tips for Maintaining Engineered Hardwood Flooring
Engineered hardwood floors are a popular choice for homeowners because of their durability and aesthetic value. However, regular maintenance is essential to keep them looking great.
To begin, scratches should be treated immediately. Sanding the area gently with fine-grit sandpaper will help to remove any imperfections. It is also recommended to use a hardwood floor cleaner that is specifically designed for engineered hardwood floors.
To ensure a spotless look, hiring a house cleaner can be beneficial. Professional house cleaners have access to specialized tools and cleaning products that can help to extend the life of your hardwood floors.
Care for Scratches
Now that your engineered hardwood floors are properly cared for on a daily basis, it’s important to learn how to deal with scratches. Even with the most careful of care, scratches can occur. But, fear not! There are several methods available for dealing with scratches on your engineered hardwood flooring.
One of the first tactics to employ is to fill the scratch with wood filler. The wood filler should be the same color as the flooring and should be slightly pressed into the scratch with a putty knife. Once the wood filler is dry, buff it down with some fine-grit sandpaper to make sure it’s flush with the rest of the floor.
Another method for dealing with scratches is to use touch-up markers.
Hire a House Cleaner
Maintaining a spotless engineered hardwood floor can be a daunting task, especially for busy homeowners. Fortunately, there is an easy solution: hiring a house cleaner.
Utilizing the services of a professional house cleaner can save a homeowner time, energy, and stress. A professional house cleaner will have the necessary expertise and resources to effectively clean engineered hardwood floors.
Moreover, the house cleaner can determine if the floor needs to be waxed or treated with a wood polish. Furthermore, hiring a good house cleaner to clean engineered hardwood floors can help prolong the life of the floor.
Engineered hardwood floors are a great choice for homes because they are durable and easy to maintain. With the right supplies and cleaning techniques, they can look new for years.
By following the best practices on how to clean engineered hardwood floors, such as using the right cleaning materials, avoiding common mistakes, and using basic cleaning techniques, homeowners can ensure their floors look great for years.
Cleaning engineered wood floors is a simple and straightforward process that requires minimal effort to keep the floors looking new.